fritz mill Operation
Product kept in the hoper slides down to the enclosed chamber , where it is milled between
beaters and screen to the required mesh / micron size which can be collected at the bottom
in the container.
Quality an output depends upon the three main variables
1. Beater shape ( impact / forward )
2. speed
3. screen size
Model : 7.5 Hp
Output : 300 – 600 kgs / hour depending on product
Knife edge for coarse or large particles and impact or flat edge for finer particles. High speed
for fine grinding, low speed for coarser particles. A wide range of screens is available for
various process needs.
Salient features :-
GMP point of view machine is provided with All Contact Parts Made Of S.S.316 & also S.S.
Cladding on base, S.S. belt guards, S. S. cover on motor. No exposed painted surface on
top of the machine.
Beaters assembly bearings are in separate pillow blocks for ease in maintenance.
Very less down time as only beaters assembly will have to be revised (and not the complete
chamber) for making it knife to impact forward or vice-versa which can be done by single
operator.
Beaters and shaft are of stainless steel 316 quality.
Transmission of heat to the chamber from the bearings is minimum as they are away in
separate pillow blocks. This facilitates to some extent in processing of heat sensitive
products.
Beaters assembly is dynamically balanced which reduces vibration and noise level and
increases bearings life.
Castors provided for mobility and breaks can be applied for fixing machine at one place.